|
|
 VOLGAMID 尼龍6增韌系列 |
|
|
Technical data sheet |
|
VolgamidÒPA6TNC102
中等增韌尼龍6
Medium toughened PA6 |
|
項目Item |
典型性能Typical Characteristic |
測試標準Testing Standard |
|
值Value |
單位Unit |
|
機械性能Mechanical Properties |
|
|
|
|
拉伸強度Tensile Strength |
46 |
MPa |
ISO527, 50mm/min |
|
斷裂伸長率Elongation at break |
|
% |
ISO527, 50mm/min |
|
彎曲強度Flexural Strength |
53 |
MPa |
ISO178, 2mm/min |
|
彎曲模量Flexural Modulus |
|
MPa |
ISO178, 2mm/min |
|
簡支梁缺口沖擊強度
Charpy Impact notched |
65 |
KJ/m2 |
ISO179/1eA |
|
簡支梁無缺口沖擊強度
Charpy Impact unnotched |
NB |
KJ/m2 |
ISO179/1eU |
|
洛氏硬度Rockwell Hardness |
108 |
|
ISO2039/2 |
|
熱性能Thermal Properties |
|
|
|
|
熱變形溫度
Temp. of deflection under load (0.45MPa) |
|
℃ |
ISO75 |
|
熱變形溫度
Temp. of deflection under load (1.80MPa) |
54 |
℃ |
ISO75 |
|
熔點Melting Point |
220 |
℃ |
ISO3146C |
|
電性能Electrical Properties |
|
|
|
|
體積電阻率Volume Resistant |
|
ohm*m |
IEC60093 |
|
表面電阻率Surface Resistant |
1012 |
ohm |
IEC60093 |
|
介電強度Dielectric Strength |
|
KV/mm |
IEC 60243-1 |
|
電痕化指數Comp Track Index |
|
V |
IEC 60112 |
|
其它Others |
|
|
|
|
密度Specific Gravity |
1.07 |
g/cm3 |
ISO1183 |
|
灰分Ash Content |
|
% |
ISO3451-4 |
|
熔體流動速率（250℃,2.16kg）
Melt flow rate |
|
g/10min |
ISO62 |
|
吸水率Water Absorption |
|
% |
ISO62 |
|
吸濕率Humidity Absorption |
|
% |
ISO62 |
|
模塑收縮率Mold Shrinkage |
1.2/1.6 |
% |
ISO294-4 |
|
燃燒性能 |
|
|
|
|
UL垂直燃燒Flammability |
HB |
mm/Class |
UL-94 |
|
灼熱絲可燃指數
Glow-wire Flammability Index |
|
mm/℃ |
IEC 60695-2-12 |
|
Disclaimer：Unless specified to the contrary, the value given have been established on standardized test specimens at room temperature.The figures should be regarded as guide values only and not as binding minimum value. Kindly note that, under certain conditions, the properties can be affected to a considerable extent by the design of the mould/die, the processing conditions and the colouring. |  下載PDF文檔 |
|
|
|
|
|
